KWSN Orbiting Fortress

Blurf · Posted: Mon Jun 18, 2012 10:19 am Post subject: Eintein Help needed

Tried to load up Einstein on my AMD box and get errors...driver says its updated

http://einstein.phys.uwm.edu//host_sched_logs/5454/5454547

2012-06-18 15:14:39.1684 [PID=31170] Request: [USER#xxxxx] [HOST#5454547] [IP xxx.xxx.xxx.116] client 6.10.58
2012-06-18 15:14:39.1788 [PID=31170] [send] effective_ncpus 4 max_jobs_on_host_cpu 999999 max_jobs_on_host 999999
2012-06-18 15:14:39.1788 [PID=31170] [send] effective_ngpus 1 max_jobs_on_host_gpu 999999
2012-06-18 15:14:39.1788 [PID=31170] [send] Not using matchmaker scheduling; Not using EDF sim
2012-06-18 15:14:39.1788 [PID=31170] [send] CPU: req 0.00 sec, 0.00 instances; est delay 0.00
2012-06-18 15:14:39.1788 [PID=31170] [send] ATI: req 864000.86 sec, 1.00 instances; est delay 0.00
2012-06-18 15:14:39.1788 [PID=31170] [send] work_req_seconds: 0.00 secs
2012-06-18 15:14:39.1788 [PID=31170] [send] available disk 99.74 GB, work_buf_min 0
2012-06-18 15:14:39.1788 [PID=31170] [send] active_frac 0.999931 on_frac 0.952255 DCF 1.000000
2012-06-18 15:14:39.1794 [PID=31170] [send] [HOST#5454547] is reliable
2012-06-18 15:14:39.1795 [PID=31170] [send] set_trust: error rate 0.100000 > 0.050000, don't trust
2012-06-18 15:14:39.1932 [PID=31170] [version] Checking plan class 'BRP4SSE'
2012-06-18 15:14:39.1937 [PID=31170] [version] reading plan classes from file '../plan_class_spec.xml'
2012-06-18 15:14:39.1937 [PID=31170] [version] Don't need CPU jobs, skipping version 122 for einsteinbinary_BRP4 (BRP4SSE)
2012-06-18 15:14:39.1937 [PID=31170] [version] Checking plan class 'opencl-ati'
2012-06-18 15:14:39.1937 [PID=31170] [version] parsed project prefs setting 'gpu_util_brp' : false : 0.000000
2012-06-18 15:14:39.1938 [PID=31170] [version] ATI device (or driver) doesn't support OpenCL
2012-06-18 15:14:39.1938 [PID=31170] [version] Checking plan class 'BRP4cuda32'
2012-06-18 15:14:39.1938 [PID=31170] [version] parsed project prefs setting 'gpu_util_brp' : false : 0.000000
2012-06-18 15:14:39.1938 [PID=31170] [version] No CUDA devices found
2012-06-18 15:14:39.1938 [PID=31170] [version] Checking plan class 'BRP4cuda32nv301'
2012-06-18 15:14:39.1938 [PID=31170] [version] parsed project prefs setting 'gpu_util_brp' : false : 0.000000
2012-06-18 15:14:39.1938 [PID=31170] [version] No CUDA devices found
2012-06-18 15:14:39.1938 [PID=31170] [version] Checking plan class 'opencl-ati-6900'
2012-06-18 15:14:39.1939 [PID=31170] [version] parsed project prefs setting 'gpu_util_brp' : false : 0.000000
2012-06-18 15:14:39.1939 [PID=31170] [version] ATI device name: 'ATI Radeon HD5800 series (Cypress)' doesn't match 'Radeon HD 6900'
2012-06-18 15:14:39.1939 [PID=31170] [version] no app version available: APP#19 (einsteinbinary_BRP4) PLATFORM#2 (windows_intelx86) min_version 0
2012-06-18 15:14:39.3216 [PID=31170] [version] Checking plan class 'SSE2'
2012-06-18 15:14:39.3216 [PID=31170] [version] Don't need CPU jobs, skipping version 113 for einstein_S6LV1 (SSE2)
2012-06-18 15:14:39.3217 [PID=31170] [version] no app version available: APP#20 (einstein_S6LV1) PLATFORM#2 (windows_intelx86) min_version 0
2012-06-18 15:14:39.3236 [PID=31170] [debug] [HOST#5454547] MSG(high) No work sent
2012-06-18 15:14:39.3236 [PID=31170] [debug] [HOST#5454547] MSG(high) see scheduler log messages on http://einstein.phys.uwm.edu//host_sched_logs/5454/5454547
2012-06-18 15:14:39.3236 [PID=31170] Sending reply to [HOST#5454547]: 0 results, delay req 60.00
2012-06-18 15:14:39.3239 [PID=31170] Scheduler ran 0.162 seconds
_________________

stooper101 · Posted: Mon Jun 18, 2012 11:23 am Post subject:

Blurf,

After looking at your list of computers on Einstein, the active one has boinc 6.10.58. Einstein requires at least 7.0.27 for amd gpus (which I'm assuming you are trying to use). Also, remember to check your Einstein preferences in your account so that you are allowing ATI gpu and disallowing Nvidia. It looks like the scheduler is looking for both ATI and Cuda, cpu it seems to say it doesn't need.

Hopefully this helps.
_________________

>stats<

Killerrabbit · Posted: Mon Jun 18, 2012 12:16 pm Post subject:

We need more GPUs.

Ni
_________________

Blurf · Posted: Wed Jun 20, 2012 1:51 pm Post subject:

I used Einstein on my AMD box with this version (6.10.58 ) previously Sad

_________________

The King's Own · Posted: Thu Jun 21, 2012 6:42 am Post subject: re Help Needed

I am bringing a rig I built out of spare parts online today.

AMD AthlonII 620 x4, 3 gB DDR2, EVGA GTS 450.

I'll dedicate this one to Einstein

#ni-2

_________________

What are you going to do, bleed on me?

Concrete-mixing Moose · Posted: Thu Jun 21, 2012 9:14 am Post subject:

Jolly good show, old man. Pip pip!

_________________

Save my home - click every day on the picture!

Pooh Bear 27 · Posted: Thu Jun 21, 2012 10:08 am Post subject:

Blurf,

Einstein has a few bugs that need fixing. If you want CPU jobs and have a GPU enabled it will not send it if you are not at a GPU version that Einstein will take. Shut off all GPU and you will get CPU work.

If you are wanting ATI GPU work, 7.0.27 is needed for ATI along with OpenCL. That is the requirement. You still should shut off Nvidia GPU.

The King's Own · Posted: Thu Jun 21, 2012 10:17 am Post subject:

The King's Own · Posted: Thu Jun 21, 2012 10:21 am Post subject:

Blurf · Posted: Thu Jun 21, 2012 12:15 pm Post subject:

Then I guess I'm not doing Einstein Smile

_________________

The King's Own · Posted: Thu Jun 21, 2012 1:34 pm Post subject: KWSN-Einstein

KWSN,
In honour of my passing 2,500,000, I am pleased to announce that rig KWSN-Einstein (Built entirely of used swallow droppings) is Online and Crunching both Flavours of Stormy Beavers Noses En-Croute.

_________________

What are you going to do, bleed on me?

Concrete-mixing Moose · Posted: Thu Jun 21, 2012 4:48 pm Post subject:

I say old chap, looks like you need another dashed imagehost. Unless you want to put some shillings the way of Freeservers, I'd suggest using Photobucket or another free imagehost. Toodle pip!
#ni-1

_________________

Save my home - click every day on the picture!

The King's Own · Posted: Thu Jun 21, 2012 6:38 pm Post subject: Oh Moosey

I. That's what you get for linking from an RAF website.
II. I can make it look like an accident ya' know.
_________________

What are you going to do, bleed on me?

Killerrabbit · Posted: Fri Jun 22, 2012 11:49 pm Post subject:

Been awhile since we had a spare parts rig put together. I remember the last one where all the Knights either chipped in money or parts and I believe someone built and host KWSN-SpareParts III.

Ni
_________________