KWSN Orbiting Fortress

The Knighty NI · Posted: Sat Nov 05, 2011 4:48 pm Post subject: Clocking an AMD Phenom 1100T

Does anyone have any information on how to clock a Phenom 1100T 6 core 3333mh proc.

Currently clocked to 3691mb with a steady 39c temp. Would like to take the temp up to about 55-60c with a much higher clock speed.

When I try to take it higher the machine tends to bug out every few hours, graphics become fuzzy and the machine is generally unstable.

Looked at various YouTube vids and other OC sites without any real concrete answers. Tried various scenarios without much success so far.
_________________
What is that in the Shrubbery?

Sir Papa Smurph · Posted: Sat Nov 05, 2011 5:05 pm Post subject:

You will probably have to run the voltage up to get a higher clock. That will take the temp higher right off the bat. But you just may smoke the chip. Try running up the voltage slowly and the clocks at 5 mhz at at time...

Btw: the right way to oc is to under clock the cpu and memory and oc the board till it becomes unstable. write it down.

then underclock the cpu and the board and oc the memory the same way. write that down too.

then underclock the board & memory and see how far the cpu will go..

Then you will have a baseline on all the parts and you can see which one is the limiting factor....
_________________
a.k.a. Licentious of Borg.........Resistance Really is Futile.......
and a Really Hoopy Frood who always knows where his Towel is...

The Knighty NI · Posted: Sat Nov 05, 2011 6:42 pm Post subject:

Cheers Papa

I have some work to do to clock this one Smile

I'll let you know how it turns out. Anticipating about 4.2 Ghz which seems reasonable for this Proc.
_________________
What is that in the Shrubbery?